Roof Coatings

Titan X-Armour

Advanced professional roof protection developed for demanding maintenance and refurbishment applications.

Why X-Armour

01

Higher-Tier Protection

Positioned above Aqua Guard in the Titan Shield coatings family for more demanding work.

02

Performance

Verified performance claims only. Figures are published once confirmed against approved technical data.

03

Applications

Flat and pitched roofs, weathered asphalt, concrete, brickwork, GRP/fibreglass, felt, metals and EPDM, subject to substrate preparation and priming requirements.

04

Two Pack Sizes

Available in 5kg and 20kg, matching the Aqua Guard format for merchant stockholding.

Preparation & Application

01

Preparation — Clear moss, lichen and debris by brushing or power washing, remove surface water and contamination, and repair splits, cracks and joints with a suitable roofing-grade repair material before the surface is allowed to dry. Primer requirements depend on the substrate and system.

02

Application — Cold-applied — no hot works. Stir thoroughly without introducing air; do not thin. Apply at the specified minimum rate by brush or solvent-resistant roller. Application temperature 5°C–30°C.

03

Coverage — Single coat and primed system: minimum 1 litre/m². Fully reinforced system: base coat minimum 1 litre/m², topcoat minimum 0.5 litre/m².

Technical & Safety Data

Product codes
5kg TS-XA-5KG · 20kg TS-XA-20KG
Available sizes
5kg · 20kg
Coverage
Single coat min. 1L/m² · Fully reinforced base 1L/m² + topcoat 0.5L/m²
Cure time
Drying up to 8 hours or overnight · Full cure up to 7 days
Technical Data Sheet PDF Safety Data Sheet Pending manufacturer approval
Application rates and drying/cure times are based on the approved Titan Shield X-Armour Technical Data Sheet. External fire performance and system life-expectancy figures remain pending manufacturer confirmation and are not yet published.