Roof Coatings

Titan Aqua Guard

Professional roof protection for maintenance and refurbishment applications.

Developed for maintenance and refurbishment work
Two pack sizes for small repairs and full roof areas
Rainfall immediately after application has no adverse effect

01

Suitable Applications

Flat roofs, pitched roofs, weathered asphalt and bituminous surfaces, gutters, concrete, brickwork, GRP/fibreglass, felt and metal (galvanised and ferrous). Not for walkways, balconies, timber, new/aged PVC, Plastisol, EPDM or internal use.

02

Surface Preparation

Clear moss, lichen and debris by brushing or power washing, then remove surface water and contamination and allow to dry. Most roofing substrates will not normally require priming; highly porous, friable or fibrous cement surfaces should be primed with Aqua Guard Primer first.

03

Application

Stir well before use. Apply a generous coat by brush, roller or squeegee at the applicable minimum spreading rate. Application temperature 5°C–25°C. One coat only recommended.

04

Coverage

High build coat 1–2kg/m², standard coat approximately 1kg/m², dependent on substrate.

Figures shown are based on the approved Titan Shield Aqua Guard Technical Data Sheet. Always refer to the current data sheet before specification or use.

Technical Information

Product codes
5kg TS-AG-5KG · 20kg TS-AG-20KG
Available sizes
5kg · 20kg
Coverage
High build 1–2kg/m² · Standard approx. 1kg/m² (dependent on substrate)
Cure time
Touch dry 3–4 hours · Full cure 6–7 days
Colour
Grey, Black, Solar Reflective White

Downloads

Technical Data Sheet Final file to be confirmed Safety Data Sheet Pending manufacturer approval
Higher Tier
Titan X-Armour